A.T.E Helps Convert Your Earlier Generation Extruder From Liability To Asset!

Machinery and Technology

A.T.E Helps Convert Your Earlier Generation Extruder From Liability To Asset!

As with any older machine, synthetic textile manufacturers with aging extruders face many challenges managing these machines, such as:

Increased downtime leading to loss of production
1. Frequent failures due to obsolete hardware and electronics
2. Instances of breakdowns and tripping are higher
High maintenance costs
1. Expensive OEM services; special purpose drives manufactured only by OEM, which are expensive and can be hard to obtain
2. Unavailability of spares, and if they are available, it is often at an exorbitant cost
Production reporting is either limited or unavailable
- Out-of-date communication protocols
Difficult to use DOS-based monitoring systems
- Require skilled workers and a steep learning curve for new workers

Manufacturers therefore find themselves in a quandary: Do they make a massive investment in new, expensive machinery? Or, should they continue investing time and effort into maintaining these older machines? Solution While the extruder itself may be mechanically sound and operational, the problems mainly originate from outmoded control systems. The solution, therefore, is the complete overhaul of the control systems. A.T.E. with its deep domain knowledge in automation and upgradation of textile machinery can undertake a full-fledged, customised upgrade of an older extruder. The upgrade programme would consist of:

Replace all end-of-life embedded hardware with latest PLCs, SCADA systems and HMIs
Replacing special purpose OEM drives with standard drives which are easily available in the market, like Yaskawa and Siemens
Production reporting and trends covering a minimum period of 1 year
Archived alarm logging covering a minimum period of 1 year
PROFINET communication protocol for a future-ready system

A comprehensive upgrade from A.T.E. leads to many benefits:

Improved machine performance
1. Increased machine uptime
2. Improved machine efficiency and production
3. Diagnostic features in graphics reduces instances of breakdowns as well as start-up time after preventive maintenance
Reduced maintenance costs
1. Service and training support is easier and cheaper
2. PLC and drive hardware spares are easily available
Production reporting now available
1. WinCC SCADA systems installed enabling current and historical production reporting with trends
2. Updated latest PROFINET communication protocol allows data transfer at higher speeds without data loss resulting in accurate data logging
Easy-to-use monitoring system
- HMIs with GUI that are easier to use with a gentle learning curve for new workers
By far the more economical option, compared to buying new machines
The machine life is expected to be augmented by 10 years!

Additionally, operators have greater control over the machine as the DOS-based systems are replaced with user-friendly GUIs of the process. The control system is IoT-ready, which provides an additional layer of future-proofing. With the multitude of benefits that an A.T.E. upgrade brings, it is not surprising that the synthetic textile manufacturers are increasingly choosing this option for their extruders.